Shop : Verlinkung
Shop
Verlinkung
45,80 €ISBN 978-3-8440-7459-8Paperback142 Seiten76 Abbildungen209 g21 x 14,8 cmEnglischDissertation
Juli 2020
Neuerscheinung
Murat Bektas
BaFe(1-x)-0.01Al0.01TaxO3-δ: A material for temperature independent resistive and thermoelectric oxygen sensors
Metal-oxide semiconductor resistive oxygen sensors can be applied to control combustion processes. Such oxygen sensors may be an alternative to potentiometric or amperometric oxygen sensors due to their relatively low production costs. A limited number of semiconducting oxides is of special interest, since they show an almost temperature independent but strongly oxygen concentration dependent resistivity. The most intensively investigated Iron doped Strontium Titanate (STF) shows some instabilities in real exhaust gas applications. Therefore, Barium Iron Aluminum Tantalum Oxide (BFAT) was investigated in this thesis.
This work deals with the synthesis and the characterization of the sensor material BFAT both in the form of bulk samples and thick-films. The electrical conductivity and the Seebeck-coefficient of the sensor material were simultaneously determined in the temperature range 600 – 950 °C and in a wide oxygen partial pressure range. Defect chemical constants were derived and an initial defect chemical model of BFAT was discussed in this study.
Sensor films were produced at room temperature by using the novel coating technique “Aerosol-Deposition-Method”, abbreviated ADM. A combination of temperature independent resistive and thermoelectric BFAT oxygen sensor were manufactured and investigated. The sensors were tested successfully not only in gas mixtures but also in the exhaust pipe of a diesel engine.
This work deals with the synthesis and the characterization of the sensor material BFAT both in the form of bulk samples and thick-films. The electrical conductivity and the Seebeck-coefficient of the sensor material were simultaneously determined in the temperature range 600 – 950 °C and in a wide oxygen partial pressure range. Defect chemical constants were derived and an initial defect chemical model of BFAT was discussed in this study.
Sensor films were produced at room temperature by using the novel coating technique “Aerosol-Deposition-Method”, abbreviated ADM. A combination of temperature independent resistive and thermoelectric BFAT oxygen sensor were manufactured and investigated. The sensors were tested successfully not only in gas mixtures but also in the exhaust pipe of a diesel engine.
Schlagwörter: resistive oxygen sensor; thermoelectric sensors; sensors for harsh environments; defect chemistry; aerosol deposition method
Bayreuther Beiträge zur Sensorik und Messtechnik
Herausgegeben von Prof. Dr.-Ing. Ralf Moos und Prof. Dr.-Ing. Gerhard Fischerauer, Bayreuth
Band 31
Link zum Buch
Kopieren Sie einfach folgende Zeilen in Ihr HTML-Dokument:
Das Buch <a href="https://www.shaker.de/shop/978-3-8440-7459-8">Murat Bektas - BaFe(1-x)-0.01Al0.01TaxO3-δ: A material for temperature independent resistive and thermoelectric oxygen sensors</a><br />(ISBN: 978-3-8440-7459-8) wurde im <a href="https://www.shaker.de">Shaker Verlag</a> veröffentlicht.
Ergebnis:
Das Buch Murat Bektas - BaFe(1-x)-0.01Al0.01TaxO3-δ: A material for temperature independent resistive and thermoelectric oxygen sensors
(ISBN: 978-3-8440-7459-8) wurde im Shaker Verlag veröffentlicht.
(ISBN: 978-3-8440-7459-8) wurde im Shaker Verlag veröffentlicht.
Link zur Reihe
Kopieren Sie einfach folgende Zeilen in Ihr HTML-Dokument:
Die Reihe <a href="https://www.shaker.de/Reihe/424">Bayreuther Beiträge zur Sensorik und Messtechnik</a> erscheint im <a href="https://www.shaker.de">Shaker Verlag</a>.
Ergebnis:
Die Reihe Bayreuther Beiträge zur Sensorik und Messtechnik
erscheint im Shaker Verlag.
Shaker Verlag GmbH
Am Langen Graben 15a
52353 Düren
Am Langen Graben 15a
52353 Düren
Mo. - Do. 8:00 Uhr bis 16:00 Uhr
Fr. 8:00 Uhr bis 15:00 Uhr
Fr. 8:00 Uhr bis 15:00 Uhr
Kontaktieren Sie uns. Wir helfen Ihnen gerne weiter.
